Flat Roof Contractors in Ann Arbor, Michigan

The three most common flat roof systems: TPO (thermoplastic polyolefin) at $5.50–$9/sq ft installed — most popular for energy efficiency and heat-welded seams; EPDM rubber membrane at $4.50–$8/sq ft — durable and long-lasting; modified bitumen at $3–$7/sq ft — traditional and economical. For commercial applications, TPO is the industry standard. For low-slope residential roofs, EPDM or modified bitumen often make more sense.

EPDM and modified bitumen roofs last 20–25 years with proper maintenance. TPO systems typically last 15–20 years. The key to flat roof longevity is drainage maintenance — clogged drains allow water pooling which degrades any membrane rapidly. Annual inspections and drain clearing in spring and fall extend flat roof life significantly.

Flat roofs have a higher leak risk when drains are clogged and water pools. A properly installed flat roof with maintained drainage performs reliably for decades. The most common failure point is around penetrations (vents, HVAC units, skylights) and at seams. Annual inspections catch 90% of potential problems before they become active leaks.

PickARoofer lists local flat roof contractors in Ann Arbor, MI compiled from public records. Contractors whose license we have independently confirmed against the official state registry show a Verified badge. Submit your request above and it goes to one local contractor, never resold — free for homeowners.

Most Michigan jurisdictions require a building permit for a re-roof or tear-off; minor repairs often do not. A reputable local contractor pulls the permit, schedules the inspection, and builds to code. Michigan Residential Builder or Maintenance & Alteration Contractor license.

If the roof is under 15 years old and damage covers less than about a third of the surface, a repair to the shingles, flashing, or drip edge usually makes sense. Past 20 years, or when repair nears half the cost of a re-roof, a full tear-off is the better long-term value. A free inspection settles it.

Flat roof maintenance in Ann Arbor centers on drainage: clear drains and scuppers each fall before the first snow. Ponding meltwater under a deep snowpack is the leading cause of membrane failure here — water weighs 5.2 pounds per square foot per inch of depth, and even a few inches of standing water adds significant unplanned load. After heavy snow events, a professional roof rake or heating cables at the drain area prevent the most dangerous pooling. Annual spring inspections after snowmelt catch seam and flashing damage before it compounds.

TPO (thermoplastic polyolefin) uses heat-welded seams and a white reflective surface — the current industry standard for new commercial and residential flat roofs, best for energy efficiency. EPDM (ethylene propylene diene monomer) is a rubber membrane installed with taped or adhesive seams — very durable and forgiving, widely used on residential flat roofs for decades. Modified bitumen is a reinforced asphalt sheet applied by torch or cold adhesive — economical and familiar to many local Ann Arbor contractors, though it runs warmer than TPO and may require more frequent coating. Cost, pitch, and building type typically dictate the right choice — a Ann Arbor flat-roof specialist can walk you through the tradeoffs for your specific structure.