Deltona, FL · Metal Roofing

Metal Roofing Contractors in Deltona, Florida

Compare metal roofing options and ask each company about its experience. 27 local roofers listed, 15 verified.

Short answer: A metal roof in Deltona costs about $17,850–$42,000 for a 2,000 sq ft home at the local 1.05× cost index: panels start near $17,850, standing seam tops out near $42,000, and either lasts 40–70 years. In Deltona: 3 days with hail 1.75 inch+ (golf ball). 15 of the roofers below have a license we checked; for any other, ask for a license number and a certificate of insurance.

Get a free quote See Deltona in numbers
  • 3days with hail 1.75 inch+ (golf ball)
  • 66days a year at 90°F or hotter
  • $254,100median home value
  • 72 mphstrongest gust reported

How much life is left in my Deltona roof?

Typical lifespans are published ranges for each material; for a Deltona house, real life also depends on installation, attic ventilation and the weather Deltona gets.

Free metal roofing quote

Your request goes to one roofer, not five competitors.

Free for homeowners · No spam · One contractor at a time

Request sent

Your request has been received. A roofing contractor who accepts it can contact you to confirm the work and availability.

On Deltona's coast, metal roofing's sealed panels and concealed fasteners resist wind-driven rain far better than lapped shingles — a real advantage in a tropical-storm climate. Costs in Deltona vary by metal type and pitch — steel and aluminum standing-seam systems run higher than corrugated options, and the local labor market affects final pricing. Florida Certified or Registered Roofing Contractor license required — verify your contractor's status before signing.

Deltona in numbers

Public records for Deltona and its county, not estimates. Each figure shows its source.

  • #196of 209Deltona ranks #196 of the 209 cities we cover for share of homes built before 1980 (low end).
  • #194of 209Deltona ranks #194 of the 209 cities we cover for freeze-thaw days (low end).
  • #181of 209Deltona ranks #181 of the 209 cities we cover for damaging thunderstorm-wind days (low end).
  • #49of 209Deltona ranks #49 of the 209 cities we cover for yearly rainfall.

Hail reports per year in the county

Hail events per year in the county, 2017 to 2026* 5 2017 5 2018 5 2019 6 2020 10 2021 7 2022 1 2023 1 2025 3 2026*
Hail events per year in the county, 2017 to 2026*
20175
20185
20195
20206
202110
20227
20231
20251
2026*3

43 recorded events across 8 full years plus 2026 to June represented in the data. 2021 had the most events among represented full years: 10.

2026 covers only January to June: NOAA's file ends there, so it is not counted as the worst year or in the yearly average. Years without a data row: 2024. Missing rows are not treated as zero; no annual average is shown.

Source: NOAA hail events, county level · data as of 2017–2026*

Costliest storm day on record

Aug 18, 2020

4 reports that day (2 tornado, 1 hail, 1 wind); reported property damage $8,050,000; county FIPS 12127, 2014–June 2026

Source: NOAA Storm Events · data as of 2014–June 2026

When storms hit Deltona

Hail reports by month in the county, all years combined 0 Jan 1 Feb 16 Mar 2 Apr 14 May 8 Jun 3 Jul 4 Aug 0 Sep 0 Oct 0 Nov 0 Dec
Hail reports by month in the county, all years combined
Jan0
Feb1
Mar16
Apr2
May14
Jun8
Jul3
Aug4
Sep0
Oct0
Nov0
Dec0

Most hail reports come in March; the season runs March to August. Book inspections and repairs before that window, not after.

Source: NOAA Storm Events · data as of 2014–June 2026

Roofing trade around Deltona

  • 60 roofing companies with payroll in the county, employing about 719 people; 55% have fewer than 5 employees.
  • A roofer's median pay here is $46,940 a year (Deltona-Daytona Beach-Ormond Beach, FL Metro Area).
Source: Census CBP · data as of 2023 Source: BLS OEWS, roofers · data as of May 2025

Deltona storm record: Volusia County

What the National Weather Service logged in Volusia County in 2014–2026. County level, because storm reports are filed by county, not by city limits.

  • 1962Founded
  • 33 ft (10 m)Elevation

Where hail of 1 inch or more was reported in Volusia County

1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1 in hail1.25 in hail1.25 in hail1.25 in hail1.25 in hail1.25 in hail1.25 in hail1.25 in hail1.5 in hail1.5 in hail1.5 in hail1.75 in hail1.75 in hail1.75 in hail1.75 in hail1.75 in hail2 in hail2 in hail Deltona
  • 311 to 1.74 in
  • 71.75 to 2.74 in, golf ball to tennis ball
  • 02.75 in and up, baseball

Largest plotted stone: 2 in. Bigger dots are bigger stones.

38 reports of 1 inch or larger have coordinates. Each dot is a reported location, not a storm path.

Sources: NOAA, Census county outline

Biggest hail days

DateLargest hailReports that dayWhere it was reported
March 20, 2018 2 in, about the size of a hen egg 5 Holly Hill
August 9, 2020 1.75 in, about the size of a golf ball 3 Deltona
March 16, 2022 1.75 in, about the size of a golf ball 3 New Smyrna Beach
“Several reports of half dollar to golf ball sized hail were received from trained spotters and the public in Deltona.”
National Weather Service report, August 9, 2020
Source: NOAA Storm Events Database · data as of 2014–2026

Last big hail on record

March 16, 2022

Hail of 1.75 inches (golf ball) or larger fell on 3 days in 2014–2026. Our records end where NOAA's do, so a newer storm may not be listed yet.

Strongest tornado

EF2 · August 18, 2020

It stayed on the ground for 4.59 miles and was up to 550 yards wide. A National Weather Service Damage Survey confirmed that a strong tornado moved through North DeLand along a 4.6 mile long path with peak winds estimated between 110-120 mph. The tornado began around the intersection of W Minnesota Ave and N Ridgewood Ave, near the West Minnesota Estates neighborhood.

Strongest thunderstorm gust

72 mph · August 20, 2020

The AWOS at the DeLand Municipal Airport, KDED, measured a peak wind gust of 73 mph from the south-southwest. Three prop planes at the airport were flipped, and several hangers sustained damage.

What it means for metal roofing

Hail up to 2 inches has been reported in Volusia County. Ask any metal roofer for the UL 2218 impact class of the panel (Class 4 is the top rating, tested with a 2-inch steel ball).

Storm data: NOAA Storm Events (public domain). City facts: Wikidata (CC0).

What it costs in Deltona

Metal roof, 2,000 sq ft home, adjusted for Deltona labor and material prices. Your quote depends on roof size, pitch and scope.

That typical price is about 11.8% of the median Deltona home value ($254,100).

Source: Census ACS (Deltona city) · data as of 2019–2023

Full Deltona cost guide by material →

What Deltona's climate means for metal roofing

  • On Deltona's coast, specify aluminum or coated-steel panels rated for high wind uplift — bare steel fasteners corrode in salt air, so coastal-grade coatings matter.

Roofers in Deltona, FL

27 listed, first 20 shown. Roofers we verified against a public registry come first.

This list covers roofing companies generally. Confirm metal roofing experience, materials, insurance and current availability with each company. A Verified badge refers to the registry check, not a confirmed specialty.

Metal Roofing in Deltona: questions

How do I find a metal roofing company in Deltona?
PickARoofer lists roofing companies serving Deltona, FL. This is a general roofing directory; confirm metal roofing experience and availability with each company. A Verified badge describes a separate registry check, not a confirmed service specialty or insurance check. Confirm scope, insurance and availability directly. Requests go to one contractor at a time, with up to three attempts; a response or start date is not guaranteed. Free for homeowners.
Will insurance pay for storm-related metal roofing in Deltona?
Coverage, deductibles and reporting deadlines depend on your policy and circumstances. Document damage safely, contact your insurer promptly and ask for a written repair scope. This directory cannot determine coverage.
How big does hail get near Deltona?
The largest hail NOAA logged near Deltona measured 2 inches, about the size of a hen egg. Hail of an inch or more fell on 20 days in the same record. The biggest day was March 20, 2018, with 5 reports. The National Weather Service calls hail of 1 inch or larger severe; the bigger the stone, the more likely it is to crack a shingle.
What does roofing cost in Deltona?
For an average 2,000 sq ft home we model metal roof at $17,850 to $42,000 in Deltona, around $29,900 in the middle. That is about 11.8% of the median home value of $254,100. Your quote moves with roof size, pitch and how many layers come off.
When is hail season in Deltona?
March is the worst month: 33% of the 48 hail reports NOAA holds for the county came then. Reports run from March to August. Book the inspection before March, while crews still have open dates.
How old are the homes in Deltona, and does it matter for the roof?
The median home in Deltona was built in 1988, and 21% of homes date from before 1980 (Census ACS). A roof on a home that old has often been re-covered at least once, so ask the roofer whether there is a second layer underneath: it changes the tear-off cost. The area sees about 2 freeze-thaw days a year, which loosens flashing and sealant.
How many roofing companies work around Deltona?
The Census Bureau counts 60 roofing companies with payroll in Volusia County, employing about 719 people. 55% of them have fewer than five employees, so most quotes come from owner-run crews. A roofer's median pay is $46,940 a year (BLS).
What metal roofing options make sense for Deltona homes?
The most common choices in the Deltona market are standing-seam steel (40+ year lifespan, highest cost, concealed fasteners), corrugated steel or ribbed panels (lower cost, exposed fasteners that need periodic checking), and stone-coated steel (looks like traditional shingles, very durable). Aluminum is a good fit near salt-air environments because it does not rust. Copper is used on specialty architectural applications. The right choice depends on your roof pitch, architectural style, and budget — a local contractor familiar with Deltona conditions can walk through the options on your roof.
How do I find a qualified metal roofing contractor in Deltona?
Metal roofing installation is more specialized than standard shingle work — look for contractors who hold manufacturer certification for the specific panel system they are installing, since certification is often required to activate the full warranty. Florida Certified or Registered Roofing Contractor license required. PickARoofer lists Deltona-area contractors. Contractors with a Verified badge have had their license independently confirmed against the official state registry. Submit your request above and one specialist contacts you directly — not a list of competing bids.
Do I need a permit for metal roofing in Florida?
Permit requirements depend on the property, scope of work and local jurisdiction. Check with the city or county building department and confirm who will obtain any required permit before work starts.

More in Deltona

Metal Roofing in nearby Florida cities

All roofers nearby

Figures above: NOAA Storm Events Database (hail, wind, tornado; county of the city, 2014–2026), U.S. Census Bureau American Community Survey 5-year estimates (housing), NASA POWER (temperature and rain, 2014–2023). Prices: our published price method. How we collect data.