Bentonville, AR · Metal Roofing

Metal Roofing Contractors in Bentonville, Arkansas

Compare metal roofing options and ask each company about its experience. 15 local roofers listed, 14 verified.

Short answer: A metal roof in Bentonville costs about $13,940–$32,800 for a 2,000 sq ft home at the local 0.82× cost index: panels start near $13,940, standing seam tops out near $32,800, and either lasts 40–70 years. In Bentonville: 17 days with hail 1.75 inch+ (golf ball). 14 of the roofers below have a license we checked; for any other, ask for a license number and a certificate of insurance.

Get a free quote See Bentonville in numbers

17days with hail 1.75 inch+ (golf ball)
48days a year at 90°F or hotter
$370,700median home value
96 mphstrongest gust reported

How much life is left in my Bentonville roof?

Roof material Installed in

Typical lifespans are published ranges for each material; for a Bentonville house, real life also depends on installation, attic ventilation and the weather Bentonville gets.

Free metal roofing quote

Your request goes to one roofer, not five competitors.

Your name

Phone number

Email address (optional) Property address (optional) Type of work needed Brief description (optional)

I agree that PickARoofer may match my request with up to three roofing contractors, one at a time if an earlier contractor does not accept it. Each matched contractor may contact me by phone, text (SMS) and email about my request. Msg & data rates may apply. See the Terms of Service and Privacy Policy.

Free for homeowners · No spam · One contractor at a time

Request sent

Your request has been received. A roofing contractor who accepts it can contact you to confirm the work and availability.

Metal roofing earns its premium in Bentonville: with roughly 6 hail-producing storms a typical year, a hard-panel roof resists the bruising and granule loss that shortens asphalt shingles in high-hail markets. Costs in Bentonville vary by metal type and pitch — steel and aluminum standing-seam systems run higher than corrugated options, and the local labor market affects final pricing. Arkansas Contractors Licensing Board license or registration required (roofing specialty) — verify your contractor's status before signing.

Bentonville in numbers

Public records for Bentonville and its county, not estimates. Each figure shows its source.

#207of 209Bentonville ranks #207 of the 209 cities we cover for share of homes built before 1980 (low end).
#18of 209Bentonville ranks #18 of the 209 cities we cover for largest hailstone on record.
#24of 209Bentonville ranks #24 of the 209 cities we cover for median home value.
#25of 209Bentonville ranks #25 of the 209 cities we cover for hail days of 1 inch or more.

Hail reports per year in the county

Hail events per year in the county, 2017 to 2026*
2017	15
2018	14
2019	8
2020	14
2021	11
2022	4
2023	27
2024	19
2025	31
2026*	26

169 recorded events across 9 full years plus 2026 to June represented in the data, about 15.9 per represented full year. 2025 had the most events among represented full years: 31.

2026 covers only January to June: NOAA's file ends there, so it is not counted as the worst year or in the yearly average.

Source: NOAA hail events, county level · data as of 2017–2026*

Costliest storm day on record

May 26, 2024

27 reports that day (10 hail, 10 wind, 7 tornado); reported property damage $109,850,000; county FIPS 05007, 2014–June 2026

Source: NOAA Storm Events · data as of 2014–June 2026

When storms hit Bentonville

Hail reports by month in the county, all years combined
Jan	7
Feb	10
Mar	48
Apr	55
May	40
Jun	4
Jul	14
Aug	7
Sep	4
Oct	8
Nov	0
Dec	0

Most hail reports come in April; the season runs January to October. Book inspections and repairs before that window, not after.

Source: NOAA Storm Events · data as of 2014–June 2026

Roofing trade around Bentonville

23 roofing companies with payroll in the county; 70% have fewer than 5 employees.
A roofer's median pay here is $47,220 a year (Fayetteville-Springdale-Rogers, AR Metro Area).

Source: Census CBP · data as of 2023 Source: BLS OEWS, roofers · data as of May 2025

Bentonville storm record: Benton County

What the National Weather Service logged in Benton County in 2014–2026. County level, because storm reports are filed by county, not by city limits.

1,296 ft (395 m)Elevation

Where hail of 1 inch or more was reported in Benton County

891 to 1.74 in
331.75 to 2.74 in, golf ball to tennis ball
52.75 in and up, baseball

Largest plotted stone: 4 in. Bigger dots are bigger stones.

127 reports of 1 inch or larger have coordinates. Each dot is a reported location, not a storm path.

Sources: NOAA, Census county outline

Biggest hail days

Date	Largest hail	Reports that day	Where it was reported
April 28, 2026	4 in, about the size of a grapefruit	18	Cave Spgs
March 14, 2024	4 in, about the size of a grapefruit	5	Sulphur Spgs
May 4, 2020	3 in, about the size of a teacup	8	Rogers

“Hail up to four inches in diameter was measured near Willis D Shaw Elementary School.”
National Weather Service report, April 28, 2026

Source: NOAA Storm Events Database · data as of 2014–2026

Last big hail on record

April 28, 2026

Hail of 1.75 inches (golf ball) or larger fell on 17 days in 2014–2026. Our records end where NOAA's do, so a newer storm may not be listed yet.

Strongest tornado

EF3 · May 26, 2024

It stayed on the ground for 6.1 miles and was up to 3200 yards wide. This is the second segment of a two-segment tornado. The tornado intensified and widened as it moved into Benton County, across Coon Hollow Road and Carlton Drive, where homes and outbuildings were destroyed and tree damage was extensive.

Strongest thunderstorm gust

96 mph · May 26, 2024

Strong thunderstorm wind damaged hundreds of homes, blew down numerous power poles, and uprooted many trees in a broad swath from northwest of Bentonville, across much of Bentonville, to near Little Flock.

What it means for metal roofing

Hail up to 4 inches has been reported in Benton County. That is bigger than the 2-inch steel ball used in the UL 2218 Class 4 impact test, so ask any metal roofer which gauge and panel profile they would put on it.

Storm data: NOAA Storm Events (public domain). City facts: Wikidata (CC0).

What it costs in Bentonville

Metal roof, 2,000 sq ft home, adjusted for Bentonville labor and material prices. Your quote depends on roof size, pitch and scope.

Low
$13,940 Typical $23,350 High
$32,800

That typical price is about 6.3% of the median Bentonville home value ($370,700).

Source: Census ACS (Bentonville city) · data as of 2019–2023

Full Bentonville cost guide by material →

What Bentonville's climate means for metal roofing

Standing-seam metal has no granules to lose and far fewer seams to crack, so it shrugs off the freeze-thaw cycling that ages shingles quickly in Bentonville.
Reflective metal and cool-roof coatings cut attic heat gain under Bentonville's intense sun, trimming summer cooling bills where dark asphalt just bakes.
Metal resists puncture from Bentonville's hail, though soft aluminum can dent cosmetically — steel or stone-coated steel holds up best where stones run large.

Nortons Construction Group

2700 SE OTIS CORLEY DR STE 2, Bentonville, AR 72712

Free quote View profile

STR8 UP Roofing & Construction

609 SW 8th St 6th floor Suite 646, Bentonville, AR 72712

Free quote View profile Website

Shewmaker Roofing LLC

701 NW McNelly Rd #17, Bentonville, AR 72712

Free quote View profile Website

Toro Construction Roofing & Restoration

3604 NW Frontage Rd Ste 6, Bentonville, AR 72712

How do I find a metal roofing company in Bentonville?

PickARoofer lists roofing companies serving Bentonville, AR. This is a general roofing directory; confirm metal roofing experience and availability with each company. A Verified badge describes a separate registry check, not a confirmed service specialty or insurance check. Confirm scope, insurance and availability directly. Requests go to one contractor at a time, with up to three attempts; a response or start date is not guaranteed. Free for homeowners.

Will insurance pay for storm-related metal roofing in Bentonville?

Coverage, deductibles and reporting deadlines depend on your policy and circumstances. Document damage safely, contact your insurer promptly and ask for a written repair scope. This directory cannot determine coverage.

How big does hail get near Bentonville?

The largest hail NOAA logged near Bentonville measured 4 inches, about the size of a grapefruit. Hail of an inch or more fell on 45 days in the same record. The biggest day was April 28, 2026, with 18 reports. The National Weather Service calls hail of 1 inch or larger severe; the bigger the stone, the more likely it is to crack a shingle.

What does roofing cost in Bentonville?

For an average 2,000 sq ft home we model metal roof at $13,940 to $32,800 in Bentonville, around $23,350 in the middle. That is about 6.3% of the median home value of $370,700. Your quote moves with roof size, pitch and how many layers come off.

When is hail season in Bentonville?

April is the worst month: 28% of the 197 hail reports NOAA holds for the county came then. Reports run from January to October. Book the inspection before January, while crews still have open dates.

How old are the homes in Bentonville, and does it matter for the roof?

The median home in Bentonville was built in 2006, and 11.1% of homes date from before 1980 (Census ACS). A roof on a home that old has often been re-covered at least once, so ask the roofer whether there is a second layer underneath: it changes the tear-off cost. The area sees about 72 freeze-thaw days a year, which loosens flashing and sealant.

How many roofing companies work around Bentonville?

The Census Bureau counts 23 roofing companies with payroll in Benton County. 69.6% of them have fewer than five employees, so most quotes come from owner-run crews. A roofer's median pay is $47,220 a year (BLS).

Is metal roofing worth it in Bentonville's hail climate?

In a high-hail market like Bentonville, metal's impact resistance is a real functional advantage, not just a longevity argument. Steel panels rated Class 4 (the highest impact classification) resist hailstones without cracking or bruising, while asphalt shingles lose granules and waterproofing on every direct hit. Many insurers offer discounts for Class 4 impact-resistant roofing in high-risk areas — ask your insurer before you sign a roofing contract, because the discount can partially offset the premium over asphalt. Soft aluminum can still dent cosmetically; steel or stone-coated steel holds up better where stones run large.

How do I find a qualified metal roofing contractor in Bentonville?

Metal roofing installation is more specialized than standard shingle work — look for contractors who hold manufacturer certification for the specific panel system they are installing, since certification is often required to activate the full warranty. Arkansas Contractors Licensing Board license or registration required (roofing specialty). PickARoofer lists Bentonville-area contractors. Contractors with a Verified badge have had their license independently confirmed against the official state registry. Submit your request above and one specialist contacts you directly — not a list of competing bids.

Do I need a permit for metal roofing in Arkansas?

Permit requirements depend on the property, scope of work and local jurisdiction. Check with the city or county building department and confirm who will obtain any required permit before work starts.

More in Bentonville

Metal Roofing in nearby Arkansas cities

Metal Roofing in Rogers (6 mi from Bentonville)
Metal Roofing in Springdale (14 mi from Bentonville)
Metal Roofing in Fayetteville (20 mi from Bentonville)
Metal Roofing in Fort Smith (69 mi from Bentonville)
Metal Roofing in Conway (133 mi from Bentonville)
Metal Roofing in Little Rock (156 mi from Bentonville)

All roofers nearby

Figures above: NOAA Storm Events Database (hail, wind, tornado; county of the city, 2014–2026), U.S. Census Bureau American Community Survey 5-year estimates (housing), NASA POWER (temperature and rain, 2014–2023). Prices: our published price method. How we collect data.